Check size and orientation
Import the STL into your slicer, confirm millimetres are used and place the broadest stable surface on the build plate.
Preparing the next layer…
Digital by design. Made for your hands.From download to first print
Practical printing guide
From STL file to a confident first layer.
A dependable starting workflow for cookie cutters, clay tools, stamps and other small maker models.
Use these as starting points, not universal guarantees.
Printer calibration, filament, model geometry and environment all affect the final result.
Before you press print
A reliable four-step workflow.
Keep the first test simple. Change one variable at a time so you can understand what improved the result.
Choose balanced settings
Start around 0.20 mm layers with a 0.4 mm nozzle. Use the product recommendation as the final reference.
Match the material
PLA or PLA+ is an approachable starting point. Use the temperature range supplied by the filament manufacturer.
Preview before printing
Inspect the sliced layers for gaps, floating areas and an unexpected print time before sending the job.
Starter profile
A sensible baseline for small PLA tools.
Always prioritize the recommendation on the product page and your printer or filament documentation.
- Nozzle
- 0.4 mm
- Layer height
- 0.20 mm
- Walls
- 3 perimeters
- Infill
- 15–20%
- Supports
- Usually off
- Material
- PLA / PLA+
Common print symptoms
Small changes, better outcomes.
Poor first-layer grip
Clean the bed, confirm levelling and reduce first-layer speed. A brim may help narrow contact areas.
Rough or stringy edges
Check filament temperature, retraction and moisture. Run a small calibration model before reprinting the full tool.
Weak walls
Add another perimeter and confirm the model is not scaled below a practical wall thickness for your nozzle.
Before use: inspect the finished print for cracks, sharp defects or loose layers and follow material-safe handling practices.